The splitter mounts in an Agilent 6890 series GC. The splitter requires an electronically controlled pressure source such as the Three Channel Pressure controller (6890 option 205, 301, or 308) or a Pneumatics Control Module (PCM). Other Requirements. The calculator requires Microsof®t Excel 97 (or later), which is not supplied with this kit. Agilent o del 'Agilent advanced exchange service', che permette di ottenere un controller rigenerato in sostituzione di quello guasto. Qualora un controller dovesse essere rottamato, procedere nel rispetto delle normative nazionali specifiche. Splitter Box User Manual / 87-900-131-01 (A) 17/98.
Skip to end of metadataGo to start of metadataOn This Page
Agilent 2-way Splitter User Manual Pdf
PwrSplit2 (2-Way Power Splitter)
Symbol
Available in ADS
Parameters
Name | Description | Units | Default |
|---|---|---|---|
S21 | Transmission Coefficient, port1 to port2, complex number: 1 + j × 0, polar(), dbpolar() | None | 0.707 |
S31 | Transmission coefficient, port1 to port3, complex number: 1 + j × 0, polar(), dbpolar() | None | 0.707 |
S11 | Port1 reflection coefficient, complex number: 1 + j × 0, polar(), dbpolar() | None | 0 |
S22 | Port2 reflection coefficient, complex number: 1 + j × 0, polar(), dbpolar() | None | 0 |
Isolation | Isolation between port 2 and port 3 | dB | 100 |
ZRef | Reference impedance for all ports | Ohm | 50 |
Temp | Temperature | °C | None |
CheckPassivity | Check passivity flag: if set to yes, a passivity check is performed and a warning is output if the device is not passive; if set to no, a passivity check is not performed. | None | yes |
Delay | Time delay |
Notes/Equations
- S12 = S21 , S13 = S31 , S33 = S22
- PwrSplit2 can also be used as a power combiner.
- Use the functions polar( ), dbpolar( ) to represent the S-parameters in terms of magnitude, phase or dB, phase.